Industrial water reuse equipment is widely used in urban public environmental water and landscape water treatment processes, which not only solves the problem of urban sewage discharge, but also greatly relieves the pressure of urban non-potable water supply. The method can solve the problem of sewage discharge of various environmental protection projects, and can also solve the series of problems of sewage treatment and reuse according to the characteristics of urban domestic sewage formation.
The water recycling equipment in the industry is mainly used for wastewater that has been used in daily life, such as sewage, wastewater, etc. in toilets, bathrooms, kitchens, etc., and contains more organic matter, such as protein, in domestic sewage. , animal and vegetable fats, carbohydrates, ammonia nitrogen and other substances, there are soaps and detergents in the water discharged from the bathroom, as well as pathogenic microorganisms discharged from the toilet, such as this type of wastewater must be strictly treated. Can become a renewable water resource.

In the process of industrial water reuse equipment, more attention should be paid to the operation of the equipment, so that the equipment can be operated in good condition, and the water that meets the requirements can be continuously produced for us to realize the recycling of water.
1. Before the operation of the reclaimed water reuse facility, the operator should carefully check whether the facility equipment has any abnormal phenomena such as leakage and leakage. Clean up the surrounding debris, check the opening and closing status of each valve, the water level of the pump pipe and the water storage tank.
2. The water reuse pump is manually controlled. When in use, close the backwash valve, open the return water valve, and start the water reuse lift pump button. Turn off the water lift pump when the medium water is deactivated. The water level of the clear water pool shall not be less than 0.5 meters and higher than 2.2 meters.
3. The time for starting and stopping the water reuse pump should be notified by the user.
4. When the water volume shows low water level, it should be added to the high water level in time. The method is: close the sand filter tank drain valve, open the sand filter tank to the clear water pool valve, make the sand filter tank water flow into the clear water tank, and switch to the above valve when the water level is high.
5, the water disinfection is manually added, using sodium dichloroisocyanurate dry powder. The dosage is 200g per pool.
6. The water reuse facilities should conduct inspections of water level, facilities, equipment and pipelines during operation. In the event of an abnormality, stop the inspection and repair.
7. The operation of the reclaimed water reuse facilities shall strictly abide by the operating procedures, and the operation records shall be registered in the operation record of the sewage treatment station.